Direct drive cutting and binding AIO machine | HY-1510BAE, HY-1510BAE-7

  • Model No.

    HY-1510BAE

    HY-1510BAE-7

    Feeding system

    Alternating presser foot, feed dog and needle feeding

    Max sewing speed 

    2000 s.p.m

    Shuttle diameter

    Ф28mm

    Applied needle

    DP×17 #18-#23

    Max stitch length

    9mm

    Max alternating presser foot

    6.5mm (Manually adjusted by knob)

    Max presser foot lifting height

    16mm

    Auto trimming

    ×

    Auto back tacking

    ×

    Presser foot lifting height by air

    Auto oil system

    DL function

    Operation space

    255×103mm

    Product Description:

    1. Built-in safety and energy saving direct drive servo motor and pneumatic controller components for facilitating

    maintenance.

    2. Evenly filled binding edges by trimming the material edges directly in front of the binder.

    3. Equip pneumatic presser foot lifting, auto oil supply, up and down needle positioning, cutting system, binding device, handle back tacking, handle adjusting alternating amount of presser foot button and other functions.

    4. Alternating presser foot, needle stitch, feed dog and the binding device compose four parts feeding construction, when dealing with the edge cover sewing of straight or corner position, it can ensure the smooth and non-shifting binding effect.

     

    Typical Field of Application:

    It’s suitable for binding process for quilt and mattress.

     

    Product Advantages:

    1. Direct drive motor and pneumatic controller component: Internal 850W direct drive motor and pneumatic controller components are easy to install and maintain, continue strong penetrability as always.


    2. Cutting, binding and sewing material at the same time:

    1)It’s equipped with the knife before binding device, so that can achieve cutting, binding and sewing material at the same time. The effect is average and full.

    2)Cutting device can be attachable and convenient for binding off.


    3. Layout tank and pneumatic assisting layout device:

    1) Easy removing of the trimming waste via large layout tank and pneumatic assisting layout right beside the edge trimmer.

    2) Pneumatic assisting layout device: functions of cooling cutter and blowing waste material out.


    4. Needle gauge set:

    1)Quilted binding device: binding device entrance width 45mm, trimming with 12.5mm.

    2)Mattress binding device: binding device entrance width 55mm, trimming width 14.5mm.

     




Recommended Products

Contact Us Now!

Honyu single needle tailoring machine is equipped with knife before binding device, so that can achieve cutting, binding and sewing materials efficiently.